Overview
The Rhino-Rack 2500 Fitting Kit, part number DK377H, is a half kit that replaces the pads and clamps on a Rhino-Rack 2500 one bar roof rack. It contains two santoprene pads and two black steel clamps, and it fits the 2014–2018 Chevrolet Silverado 1500 in the Custom, High Country, LS, LT, LTZ, SSV and WT versions, and the 2014–2018 GMC Sierra 1500 in the Base, Denali, SLE and SLT versions.
The steel parts have a black powder coat finish. The kit does not need drilling, and the cross bars are a separate purchase.
Key features
- Two santoprene pads
- Two anti-corrosive black metal clamps
- Black powder coat finish
- Drilling not required
Powder coat and steel care
Powder coat gives steel a durable, slightly textured finish that handles everyday road use well. Its weak points are the edges and corners, where the coating is thinnest and where a clamp is most likely to rub against a bar or pad. Inspecting those spots every few months shows whether the finish is holding or starting to thin.
When the coating does chip, the bare steel should be cleaned and dried before any touch-up. A paint that is made to bond to metal and resist moisture will protect the spot far better than a generic coat. Keep the touch-up paint with the tools you carry so repairs can be made at the trailhead rather than after the next rain.
- Inspect clamp edges and corners every few months
- Clean and dry chips before touching up
- Carry touch-up paint with trail tools
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | DK377H |
| Part type | Half fitting kit, one bar 2500 system |
| Pads | 2 santoprene |
| Clamps | 2 black metal |
| Material | Steel |
| Finish | Black powder coat |
| Cross bars included | No |
| Installation | Drilling is not required |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2014–2018 Chevrolet Silverado 1500 in the Custom, High Country, LS, LT, LTZ, SSV and WT versions, and the 2014–2018 GMC Sierra 1500 in the Base, Denali, SLE and SLT versions. Confirm fit for your vehicle’s year, model and trim before ordering.
The Silverado and Sierra HD trucks are not on this list, and the full two bar kit for the same trucks is the DK377. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use this half kit only on a one bar 2500 rack. Tighten the clamps once the pads sit flat on the roof, then recheck them after the first loaded drive.
What’s included
Two santoprene pads and two black metal clamps.
Not included: cross bars and the rest of the one bar rack.









