Overview
The Rhino-Rack 2500 Fitting Kit, part number DK415F, is a half kit for a one bar Rhino-Rack 2500 roof rack. It contains two santoprene pads and two black steel clamps, and it fits the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD in the High Country, LT, LTZ and WT versions, and the 2015–2018 GMC Sierra 2500 HD and 3500 HD in the Base, Denali, SLE and SLT versions.
The steel has a black powder coat finish. The kit needs no drilling, and cross bars are sold separately.
Key features
- Two santoprene pads
- Two anti-corrosive black metal clamps
- Black powder coat over steel
- No drilling required
Steel clamps on heavy-duty racks
Steel clamps on a heavy-duty rack handle a lot of repeated loading, and their coating takes the abuse of gear being slid on and off. The clamp faces and the bends in the arms see the most friction, so they are the first places to show wear. A periodic close look at those surfaces tells you whether the finish is still doing its job.
Because a one bar rack relies on fewer contact points, each clamp matters more. Confirm that both clamps sit square on the bar and that neither has rotated or loosened after heavy use. Clean any grit from the threads before reinstalling, since grit in the threads makes it harder to reach the correct torque.
- Check clamp faces and arm bends for wear
- Confirm both clamps sit square on the bar
- Clean grit from threads before reinstalling
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | DK415F |
| Part type | Half fitting kit, one bar 2500 system |
| Pads | 2 santoprene |
| Clamps | 2 black metal |
| Material | Steel |
| Finish | Black powder coat |
| Cross bars included | No |
| Installation | Drilling is not required |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD in the High Country, LT, LTZ and WT versions, and the 2015–2018 GMC Sierra 2500 HD and 3500 HD in the Base, Denali, SLE and SLT versions. Confirm fit for your vehicle’s year, model and trim before ordering.
The 1500 series trucks are not on this list, and the two bar HD kit is the DK415. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use this half kit only on a one bar 2500 rack. Tighten the clamps once the pads are seated, then recheck them after the first loaded drive.
What’s included
Two santoprene pads and two black metal clamps.
Not included: cross bars and the rest of the one bar rack.









