Overview
The Rhino-Rack USA Quick Mount Heavy Duty 15mm Spacer, part number RHOQMHD15, lets you fit Rhino-Rack Heavy Duty Bars to RLT600 legs. Each kit fits one bar, and the spacer is 15mm thick.
Key features
- 15mm spacer for Heavy Duty Bars
- Fits one bar per kit
- Connects Heavy Duty Bars to RLT600 legs
- Part of the Rhino-Rack Quick Mount range
Before you buy
A roof rack spacer changes the height and position of a bar on its legs, so check how the bar sits before tightening anything. Thickness matters because a spacer that is too thin can leave the bar seated unevenly, while the wrong stack height can affect clearance over the roof. Measure the gap between the bar and the leg mounting points, then compare it with the spacer you intend to use.
Spacers are usually replaced when they show cracking, deformed edges or loose fixings. Inspect them after rough tracks and recheck the bar fasteners after the first few trips. Keep each spacer with its bar when you remove the rack so the fit stays consistent next time.
- Recheck bar fasteners after the first few trips
- Look for cracks or worn edges on the spacer
- Keep spacers with their matching bar
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHOQMHD15 |
| Thickness | 15 mm |
| Bars per kit | 1 |
| Compatible legs | RLT600 |
Vehicle fitment
No vehicle fitment is listed. The spacer is for Rhino-Rack Heavy Duty Bars on RLT600 legs, so it is not written for a particular make, model or year.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One spacer kit, which fits one bar.
Not included: Heavy Duty Bars and RLT600 legs.









