Overview
The Rhino-Rack RD4B1 is a Backbone 4 base mounting system for the Land Rover Discovery 3 and 4. It connects to the vehicle’s roof through 4 bases on each side and allows a Rhino-Rack Pioneer System to be fitted on top.
The Backbone is a steel roof rack base with a black powder coat finish. It has 4 planks and includes cross bars. It measures 47 inches wide, 58 inches long and 2 inches high, and installation requires drilling. It is a direct fit for the vehicles covered below.
Key features
- Backbone mounting system for the Land Rover Discovery 3 and 4
- Connects to the roof with 4 bases on each side
- Lets a Rhino-Rack Pioneer System be fitted on top
- 4 planks
- Cross bars included
- Steel with a black powder coat finish
- Width 47 inches, length 58 inches, height 2 inches
- Drilling is required for installation
Carrying loads on a roof rack
A roof rack adds height, wind resistance and weight to a vehicle, and all three affect handling. Loads should be spread evenly across the bars and kept low where possible. Drive more slowly when the roof is loaded, since braking distances increase.
Steel bases with a powder coat finish resist everyday wear, but they can still corrode where chips expose metal. Look over the frame, bars and clamps after rough tracks or washing, and clean off grit that could scratch the finish. Sealant around drilled holes should be checked for cracks each season.
- Secure loads with straps rated for the load
- Recheck tightness after rough off-road sections
- Clean grit from the frame to protect the coating
- Remove the rack when not in use to reduce wind noise
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RD4B1, also known as RHORD4B1 |
| Product type | Roof rack mounting system |
| Roof rack type | Roof rack |
| Number of planks | 4 |
| Bases | 4 on each side |
| Cross bars | Included |
| Material | Steel |
| Finish | Black powder coat |
| Width | 47 inches |
| Length | 58 inches |
| Height | 2 inches |
| Installation | Drilling is required |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Rhino-Rack RD4B1 includes:
- 1994–1999, 2003–2004, 2017–2020 Land Rover Discovery (50th Anniversary Edition, Base, First Edition, HSE, HSE Luxury, LE, LSE, Landmark Edition, S, SD, SE, SE7, XD)
- 1999–2002 Land Rover Discovery Series II (LE, SD, SE)
- 2005–2009 Land Rover LR3 (Base, HSE, HSE Lux, SE)
- 2010–2013 Land Rover LR4 (Base, HSE, HSE Lux, V8)
It fits the Land Rover Discovery 3 and 4, along with other Discovery years and the LR3 and LR4 models covered by this fit. Years and models outside that coverage are not included, and a Pioneer System is needed on top. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Roof racks involve drilling into the roof, so professional installation is advised. Follow the template supplied with the system, seal the drilled holes as directed, and tighten all fasteners to the torque value given.
Do not exceed the roof load limit for the vehicle or the rating of the rack. Tighten the fasteners again after the first drives and after a loaded trip, and remember that a loaded roof raises the vehicle’s height.
What’s included
- Backbone 4 base mounting system, with cross bars
Not included: the Rhino-Rack Pioneer System that is fitted on top.













