Overview
The G2 Axle and Gear retaining ring, part number R1535-CLIP, is an axle shaft retainer in the drivetrain and differential category. It belongs to the OEM replacement axle parts group. Measure the ring’s diameter, thickness and material against your axle before fitting it, and confirm the axle it suits using your service information.
Retainer inspection and fit
An axle shaft retaining ring holds the shaft in place within the axle housing, keeping the shaft from working outward. The ring sits in a groove at the end of the shaft, so its fit depends on the groove and the ring’s shape. Before reuse, inspect the ring for bends, cracks or flat spots, and check the groove for wear that could let the ring slip.
Replace the ring any time the axle shaft is removed, since pulling the shaft can distort the ring and weaken its hold. Clean the axle shaft and the groove before fitting a new ring, and seat the ring fully so it sits flat in the groove. Confirm the shaft is fully retained by checking that it does not move out of the housing before road use.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | R1535-CLIP |
| UPC | 682034179916 |
| Part type | Axle shaft retaining ring |
Vehicle fitment
Check the retainer against your axle’s year, model and trim before fitting it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One retaining ring is included, and no other axle components are part of it.









