Overview
The JK4000-B is the rear replacement fender system for the 2007 to 2018 Jeep Wrangler (JK). It is the base of the 2-door JK rear fender system, built with a removable 16-gauge laser cut skin for customization and future expansion.
The system is designed for aggressive styling, ease of installation and modularity. The steel is 3/16 inch thick, with stainless steel hardware, and it is made in the USA.
Key features
- Modular rear fender system
- Removable laser cut fender skin
- 3/16-inch steel construction
- Stainless steel hardware
- Bare steel finish
- Made in the USA
Tire clearance and rear wiring
A rear fender replacement changes the coverage over the tires, so clearance deserves a careful look. Larger tires, a lift, or a heavier load can move the tire closer to the fender edge, and the fender lip is where rubbing usually starts. Check the gap at full compression on both sides and after the truck has been loaded.
Taillight and wiring routing is the other common issue. Keep harnesses clear of moving suspension parts and the tire path, and secure them with clips rather than loose ties. If a skin is removed for a different look later, recheck the wiring and clearance again before driving on rough terrain.
- Check clearance at full steering lock
- Inspect the fender lip for rubbing after trail use
- Keep clips on wiring near the tire path
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | JK4000-B |
| Position | Rear |
| Material thickness | 3/16-inch steel |
| Skin gauge | 16 gauge laser cut |
| Finish | Bare steel |
| Weight | 65 lbs |
| Height | 18 inches |
| Width | 12 inches |
| Length | 70 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and in Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S and Unlimited X trims.
The base kit is built for two-door JK models, and it also fits Unlimited four-door models, so confirm your body style. Make sure the year, model and trim match your truck before you buy.
Installation notes
A rear fender system changes the coverage over the rear tires, so check the tire clearance and the taillight and wiring routing before finishing the install.
What’s included
The rear fender system comes with stainless steel hardware and the removable skin. Compare the box contents, especially lights and brackets, with your install plan before starting.









