Overview
The Rancho RS7407 is a front RS7000MT monotube steering stabilizer for select Chevrolet and GMC trucks, plus Jeep Wrangler YJ, TJ, LJ and JK models. It is built from the Rancho RS7000 series shock, which Rancho says was engineered for Jeeps and trucks running oversized tires and wheels.
Rancho presents monotube stabilizers as a way to reduce wheel shimmy, bump steer and vibration, and to tighten steering. Rancho says they can also help reduce driver fatigue on the road and off it. The series carries a limited lifetime warranty.
Key features
- Monotube design from the RS7000MT line
- Front position stabilizer
- Red shock boot included
- Single stabilizer; brackets not included
- Rancho reports less wheel shimmy, bump steer and vibration
- Limited lifetime warranty
Before you install
A steering stabilizer damps side-to-side movement at the front wheels. On a solid front axle, that motion can come from uneven tread wear, a bent tie rod or worn ball joints, and a stabilizer dampens the response to those inputs rather than fixing the cause. Larger tires and wheels add weight and leverage at the steering, so the stabilizer works harder on the trail and at speed. It is one part of a system that also includes the drag link and tie rod ends.
Before fitting, inspect the steering linkage and the mounting points. Loose or worn joints keep a stabilizer from performing as intended and can make a new unit seem faulty. Replace worn parts before adding a stabilizer, and recheck all bolts after the first few drives, since new mounts can settle.
- Inspect tie rod ends and ball joints for play
- Check frame and axle mounting points for cracks
- Recheck mounting bolts after the first drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7407 |
| UPC | 10039703003923 |
| Series | RS7000MT |
| Position | Front |
| Single / dual | Single |
| Shock boot | Red shock boot included |
| Brackets | Brackets not included |
| Warranty | Limited lifetime warranty |
| Fitment | Direct fit |
Vehicle fitment
It fits 2002–2006 Chevrolet Avalanche 2500, 1999–2004 Chevrolet Silverado 2500, 2001–2008 Silverado 2500 HD, 2000–2002 Suburban 2500, 1999–2004 GMC Sierra 2500, 2001–2008 Sierra 2500 HD, 2000–2006 Yukon XL 2500 and 2003–2009 Hummer H2, along with several 1500 HD and 2007 Classic entries.
It fits 1987–1995 Wrangler (YJ), 1997–2006 Wrangler (TJ), 2004–2006 Wrangler (LJ) and 2007–2009 Wrangler (JK) models, plus the 1987–1992 Land Rover Range Rover. Confirm fit for your vehicle’s year, model and trim before ordering.
Wrangler JL and Gladiator models are not in this list, and 2010 and later JK years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Part number RS5510 is required to install this stabilizer on JK Wrangler models, so confirm you have RS5510 before starting that installation.
What’s included
Includes the RS7000MT monotube stabilizer with a red shock boot.
Not included: brackets, and part number RS5510 for JK Wrangler installs.









