Overview
The Rancho RS64101 is a dual steering stabilizer kit built around a 1/4 inch thick low alloy steel axle bracket. It is made for two RS5000 or RS7000 MT series stabilizers and includes mounting hardware. The kit requires two RANRS5405 or two RANRS7405 stabilizer shocks, which are not part of the kit.
Key features
- 1/4 inch thick low alloy steel bracket
- Designed for dual RS5000 or RS7000 MT series stabilizers
- Mounting hardware included
- Designed to provide twice the control forces of a single setup
- Bolts up to most aftermarket tie rods
Planning a dual stabilizer setup
A dual setup places two stabilizers across the axle, so each one shares the load and the steering stays under control at higher speeds or with larger tires. Balance matters: both units should be the same type and length, and mounted at matching angles so they work together rather than fight each other.
The bracket and shocks have to match the axle and tie rod geometry. Measure the existing tie rod and mounting points, and confirm the bolt pattern and eye style before ordering. Mismatched parts can bind at full lock and stress the mounts.
Check the steering linkage before adding a dual kit. Worn tie rod ends, idler arms and pitman arms add play that a stabilizer cannot fix. Inspect the axle for cracks around bracket welds, and recheck fasteners after the first off-road outing.
- Match both stabilizers in type and length
- Measure tie rod and mount positions before ordering
- Inspect welds and fasteners after initial trail use
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS64101 |
| UPC | 39703005791 |
| Bracket thickness | 1/4 inch |
| Material | Low alloy steel |
| Kit type | Dual stabilizer kit |
| Compatible stabilizers | RS5000 or RS7000 MT series |
| Stabilizer shocks required | Two RANRS5405 or RANRS7405 |
| Mounting hardware | Included |
Vehicle fitment
Confirm axle and tie rod compatibility for your vehicle’s year, model and trim before ordering.
Installation notes
The kit requires two stabilizer shocks, so confirm they match the RS5000 or RS7000 MT series before installing the bracket.
What’s included
Dual steering stabilizer bracket with mounting hardware.
Not included: two RANRS5405 or RANRS7405 stabilizer shocks.









