Select your vehicle

Rancho RS7000MT Monotube Shock – RS7369

Rancho

Shop Ram 1500 Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear Rancho RS7369 monotube shock for 2009–2010 and 2011–2018 Dodge and Ram 1500 trucks
  • Lift setting is w/2.5 in. Lift
  • Application specific valving and 2 inch body
  • Part number RS7369, UPC 10039703005767

Description

Overview

The Rancho RS7369 is a rear monotube shock from the RS7000MT Series for the 2009–2010 Dodge Ram 1500 and 2011–2018 Ram 1500, listed with a 2.5 in. lift. It is a gas charged design, and Rancho describes its valving as beyond OE specifications.

The body is 2 inch in diameter and the finish is brushed-zinc with a clear coat. The shock is made in America.

Key features

  • Gas charged monotube design
  • Application specific valving
  • 2 inch diameter shock body
  • Brushed-zinc finish with clear coat
  • Direct fit mounting for the listed Ram 1500 trucks

Gas charged rear shocks

Gas charged rear shocks hold a pressurized charge that helps keep oil stable while the shock works. Under repeated bumps, heat builds up in the body, and a shock that manages heat well keeps its damping more consistent. Because of the charge, the body should stay intact, and removal should be done with eye protection. Match the lift setting to the truck before choosing a rear shock.

Application specific valving is tuned to a particular vehicle, so the shock should match the year, model and trim. Rear shocks often work with the bump stops, spring seats and upper mounts, and worn parts there can change ride quality. During installation, inspect the mounting bushings and check the boot for cracks before reinstalling.

  • Match the lift to the shock
  • Wear eye protection during removal
  • Check upper mounts and bushings
  • Inspect bump stops for wear
  • Replace in pairs for matched damping

Specifications

Brand Rancho
Part number RS7369
UPC 10039703005767
Shock series RS7000MT Series
Position Rear
Shock type Monotube, gas charged
Lift height w/2.5 in. Lift
Body diameter 2 inch
Finish Brushed-zinc, clear coated
Mounting Direct fit

Vehicle fitment

The 2009–2010 Dodge Ram 1500 is listed in Laramie, SLT, ST, Sport and TRX4 trims. The 2011–2018 Ram 1500 covers Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Special Service, Sport and Tradesman trims.

The TRX trim is not on the 2009–2010 entry, and the Tradesman HD trim is not on the 2011–2018 entry. Other Ram models are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Match your truck’s lift to the 2.5 in. figure before installing, since this setting is the sizing reference for this shock.

What’s included

The RS7369 rear shock.

Not included: Check the contents for a boot or extra hardware before installing.

SKU: RANRS7369 Category:

Specification

Shipping weight 6.61 lbs
Package dimensions 24.10 × 4.10 × 3.10 in
brands

Fitment

VehicleYearsTrims
Dodge Ram 15002009–2010Laramie, SLT, ST, Sport, TRX4
Ram 15002011–2018Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Special Service, Sport, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the RS7369 go on a rear axle?

Yes. The position is rear, and the RS7369 is a direct fit monotube from the RS7000MT Series for the covered Dodge and Ram 1500 trucks.

Does the RS7369 fit the 2009–2010 Dodge Ram 1500 TRX?

No, the TRX trim is not on the 2009–2010 entry. That entry lists Laramie, SLT, ST, Sport and TRX4 trims, so check your trim before choosing this shock.

What lift is the RS7369 rated for?

It is set for w/2.5 in. Lift, meaning it is designed for a truck with a 2.5 in. lift. Confirm your suspension height matches that figure before installation.

What is the part number and body size?

The part number is RS7369 and the UPC is 10039703005767. The body is 2 inch in diameter, with a brushed-zinc finish and application specific valving.

Can a rear shock be used after a lift change?

Only if the new lift still matches the shock's setting. A lift change can alter the shock length and working range. Measure the suspension height again and confirm the shock suits the updated setup before installing it.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ram 1500 Shock Absorbers on Amazon