Overview
The Rancho RS7000MT Monotube Shock, part number RS7254, is a rear gas charged monotube shock for the 1999–2016 Ford F-250 and F-350 Super Duty. It has a lift range of 0 to 2.5 inches and is a direct fit.
The RS7000MT is a high-pressure gas charged monotube shock with ten stage velocity sensitive valving. It has a 14mm chrome rod, black natural rubber bushings and a protective boot. The monotube design is built to help dissipate heat for less fade, and the valving responds quickly to off-road obstacles. The shock is made in America.
Key features
- Ten stage velocity sensitive valving
- Gas charged monotube design
- 14mm chrome rod
- Black natural rubber bushings
- Protective boot included
- Brushed zinc, clear coated finish
- Application-specific valving.
Choosing the right rear shock
A rear shock controls how the axle moves over bumps and under braking, so matching the shock to the lift and load of the truck matters. Valving that is matched to the lift range helps the shock work as intended, while a shock sized for a different height can bottom out or run too stiff. Off-road driving puts more heat and more repeated stress on a shock, which is why sealing and bushing condition matter.
When replacing rear shocks, many owners also check the leaf springs, shackles, bump stops and rear bushings, since worn parts change how a new shock performs. Replacing shocks in pairs keeps the rear end balanced from side to side.
- Confirm lift range before ordering
- Check bushings and mounts for wear
- Inspect bump stops for cracks
- Replace shocks in pairs
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7254 |
| Shock series | RS7000MT |
| Position | Rear |
| Lift range | 0 to 2.5 in. |
| Body diameter | 1.97 in. (50 mm) |
| Rod | 14 mm chrome |
| Design | Gas charged monotube |
| Valving | Ten stage, velocity sensitive |
| Bushings | Black natural rubber |
| Boot | Included |
| Finish | Brushed zinc, clear coated |
| UPC | 39703002370 |
Vehicle fitment
The RS7254 fits the 1999–2016 Ford F-250 Super Duty and F-350 Super Duty, in the rear position only.
The list does not include the F-150 or Super Duty years outside 1999–2016. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the shock’s 0 to 2.5 inch lift range against your current suspension height before installing. The valving is application specific, so match the shock to the lift range it covers.
Support the rear axle before removing the old shock.
What’s included
A protective boot is included with the shock.









