Overview
The Rancho RS55151 is a front gas-charged shock absorber from the RS5000X Series, fitting Chevrolet and GMC full-size trucks and SUVs from 1968 to 1991. It covers Blazer, Jimmy, Suburban and K and V series models, and trims are covered for each model.
The body is an enlarged 2 1/4-in. twin tube design with a 16mm nitro-carburized rod and a 35mm full-displaced bore. Rancho rates it for vehicles with 0 to 2 in. of lift.
Key features
- Enlarged 2 1/4-in. twin tube body
- Progressive engagement valving
- Tuned compression control valve
- 16mm nitro-carburized rod
- Full-displaced 35mm bore with 1 3/8-in. diameter sintered iron piston
- Glass-filled, Fluon banded piston
- Rebound bumper and protective boot
- Double-welded loops and black natural rubber bushings
Lift range and older trucks
Older full-size Chevrolet and GMC trucks often carry more weight at the front than their original shocks were designed to handle, especially with larger tires or accessories. A front shock used outside its lift range can bottom out or reach the end of its stroke too early. Matching the shock’s rated lift to the truck’s current height helps keep the suspension working as intended.
Front shocks on these trucks share mounts with steering and suspension linkage, so loose hardware should be addressed during the swap. Inspect the bushings and eye mounts for cracking, and clean the mounting surfaces before reinstalling. Replacing shocks in matched pairs keeps the front end balanced from side to side.
- Measure your current lift
- Check the front mounts for wear
- Inspect bushings during installation
- Keep front shocks matched side to side
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55151 |
| UPC | 10039703008423 |
| Series | RS5000X Series |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | 0 – 2 in. lift |
| Damper | Gas charged |
| Body | 2 1/4-in. twin tube |
| Rod | 16mm nitro-carburized |
| Bore | 35mm full-displaced |
| Piston | 1 3/8-in. diameter sintered iron |
| Bushings | Black, natural rubber |
| Seal | Low-friction, self-lubricating |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
It fits 1968 to 1991 Chevrolet and GMC trucks, including K10, K20, K30, V10, V20 and V30 models, K5 Blazer, Jimmy and Suburban models, with trims such as Silverado, Scottsdale and Sierra Classic.
Ford and Dodge trucks are not in this list, and model years outside 1968 to 1991 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check your truck’s lift against the 0 to 2 in. rating before choosing this front shock, since lifts beyond that range are outside what Rancho states.
What’s included
One front shock absorber, part number RS55151, with a Limited Lifetime Warranty. Check the mounting hardware against your installation before starting.









