Overview
The Rancho RS999168 is a front RS9000XL Series shock absorber for 1987 to 1995 Jeep Wrangler (YJ) models.
It is a front shock with an 18mm diameter piston rod and a 9-position manual or remote tuning system. It is nitrogen gas charged, and a protective boot is included.
Key features
- Nine damping positions with manual or remote tuning
- 18mm diameter piston rod
- Nitrogen gas charged construction
- Protective boot included
- The lift rating is w/0 – 2.5 in. Lift.
Measuring lift before you buy
Lift height is the first thing to check on a Wrangler YJ, because a shock sized for stock height behaves differently once the suspension is raised. Measure the distance from the axle to the fender at each corner, then compare the result with the lift rating before choosing a shock. Uneven measurements usually point to sagging springs rather than the shock itself.
The 9-position tuning helps you adjust damping for the way the Jeep is driven. Firmer settings control body motion on trail runs with larger tires, while softer settings keep the ride calm on pavement. Because each setting changes only damping, pick the lift height first and tune the shock afterward.
- Measure both sides and compare the readings
- Check springs and bump stops for sag or wear
- Record the setting used so you can compare changes
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999168 |
| Shock series | RS9000XL |
| Position | Front |
| Rod diameter | 18mm diameter piston rod |
| Tuning | 9-position manual/remote |
| Charge | Nitrogen gas charged |
| Lift rating | w/0 – 2.5 in. Lift |
| Boot | Protective boot included |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
It fits the Jeep Wrangler (YJ) from 1987 to 1995 in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Later Wrangler generations, including TJ and JK models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift ratings disagree, measure your current lift and compare it with both figures before choosing this shock. Check the mounting ends against the shock you are replacing.
What’s included
One RS999168 front shock absorber with a protective boot.
Not included: Check the package contents against your installation before starting, including any brackets or fasteners.














