Overview
The Rancho Duracush Polyurethane Leaf Spring Bushings, part number RS972, are red polyurethane bushings for leaf springs. Rancho lists them for the 1976–1983 Jeep CJ5 in the Base, Golden Eagle, Laredo, Limited and Renegade trims, and for the 1976–1986 CJ7 in the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims.
The bushings are non-greasable polyurethane, so they need no grease after fitting.
Key features
- Polyurethane construction
- Non-greasable service
- Red finish
- Suits front and rear positions
Leaf spring bushing wear
Leaf spring bushings sit where the spring eye meets the frame or shackle, and they absorb movement as the axle travels. Over time the bushing material compresses, cracks or wears, which lets the axle shift and can make the vehicle feel loose or wander on the highway.
Polyurethane resists the wear that rubber bushings suffer, but it still needs inspection. Look for splitting, flattening or a gap between the spring eye and the bushing. With no grease fitting to service, check the shackle bolts and the spring eye for play on a regular schedule, especially after heavy off-road use.
When replacing bushings, it often makes sense to replace the shackle bolts and sleeves at the same time, since worn hardware can damage a new bushing. Polyurethane is firmer than rubber, so expect a little more road noise and vibration.
- Check for cracks or splitting
- Look for play at the shackle and spring eye
- Replace worn shackle hardware with the bushings
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS972 |
| Type | Leaf spring bushing |
| Material | Polyurethane |
| Service | Non-greasable |
| Color | Red |
| Position | Position to confirm before ordering: front, or front and rear |
Vehicle fitment
Rancho lists these bushings for the 1976–1983 Jeep CJ5 and the 1976–1986 Jeep CJ7 in the trims named above.
Other Jeep models and years outside 1976–1986 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the bushings are non-greasable, they need no grease after fitting. Confirm the position you need before ordering.









