Overview
The ARB Shock Mount Bushing, part number SMP633, is a bushing for a shock absorber mount. Confirm the fit for your vehicle’s year, model and trim before ordering.
Confirm the size against the old bushing before fitting.
The SMP633 is a bushing for a shock absorber mount, and it cushions the shock where it attaches. If the old bushing is cracked, compressed or missing, the shock can move or rattle at the mount. Remove the old part, measure it, and compare it with the SMP633 before fitting. If the shock is used hard, check the hardness and construction of the bushing.
Confirm the fit before installing the bushing, and do not assume it suits a particular shock or vehicle from its part number alone.
Signs a shock mount is worn
A shock mount bushing sits between the shock eye and the bracket, absorbing small movements and vibration. As the rubber or polymer ages, it can split, compress or lose grip, and the shock starts to knock or rattle at the mount.
Inspect the bushing by pulling and pushing on the shock by hand with the vehicle safely supported. Look for cracks, flattening, oil or grease staining, and movement between the bushing and the bracket. Check the bolts and the bracket for cracks too.
Replace the bushing as a set when more than one mount shows wear, because the remaining old bushing will wear faster next to a new one. Tighten the shock bolts firmly once the new bushing is in place.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | SMP633 |
| Part type | Shock mount bushing |
Vehicle fitment
Confirm the fit for your vehicle’s year, model and trim before ordering.









