Select your vehicle

PSC Steering High Performance Power Steering Pump – SP1402F

PSC Steering

Shop PSC Steering Power Steering Pump on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Power steering pump for 1972-1979 Jeeps with AMC 258/304
  • SAE inverted flare fittings
  • Fits GM LS conversions with SAE flare connections

Description

Overview

The PSC Steering high performance power steering pump SP1402F (PSMSP1402F) is a power steering pump for 1972-1979 Jeeps with an AMC 258 or 304 engine and SAE inverted flare fittings. PSC also lists modified applications such as GM LS engine conversions with SAE inverted flare line connections.

PSC says its pump range covers muscle cars through vintage and modern Jeeps and most Dodge, Ford and GM trucks, with versions for rock crawlers that run at low engine rpm.

Because PSC makes several versions of the 1402 pump, the F suffix and the SAE inverted flare fittings are the points to check against your Jeep’s existing hoses.

Key features

  • Power steering pump for 1972-1979 Jeeps with AMC 258/304
  • SAE inverted flare fittings
  • Modified applications such as GM LS conversions
  • Direct-fit

Checking hoses and fittings

A power steering pump moves fluid through the steering gear and the hoses that run to it, so the fittings matter as much as the pump itself. Before installation, examine the existing lines, flare ends and any adapters already in the system. Fittings that look alike can seal differently, and a mismatch often shows up as a slow leak or a pump that runs noisy after the first drive.

Pumps built for low engine speed are often installed with fresh fluid, a cooler and a new hose set when the old system has been in service for years. Replacing the hoses at the same time avoids putting new pressure on aging rubber. Worn belts and pulleys are also worth checking, since a pump driven unevenly wears out early regardless of how well it is built.

  • Compare the fitting type on each line before ordering
  • Inspect hoses for cracks, bulges and soft spots
  • Replace the reservoir cap seal if fluid level has been low
  • Flush old fluid before filling the new pump

Specifications

Brand PSC Steering
Part number PSMSP1402F
Type High performance power steering pump
Fittings SAE inverted flare
Application 1972-1979 Jeep with AMC 258/304; GM LS conversions with SAE inverted flare connections

Vehicle fitment

It fits 1972-1979 Jeeps with an AMC 258 or 304 engine and SAE inverted flare fittings. GM LS engine conversions that use SAE inverted flare line connections are also covered. Confirm fit for your vehicle’s year, model and trim before ordering.

The 1980 and newer CJ7 pump uses MetricLine connections and is a different part. Confirm your vehicle’s year, model and trim before ordering.

Questions & Answers

What does the PSC SP1402F pump fit?

PSC lists 1972-1979 Jeeps with an AMC 258 or 304 engine and SAE inverted flare fittings, along with GM LS conversions using the same type of fittings.

What does the F in SP1402F mean?

The SP1402F uses SAE inverted flare fittings, while the SP1402 uses MetricLine connections. The F suffix marks the fitting style, so match it to your existing hoses.

Is the SP1402F for a CJ7?

PSC's note names 1972-1979 Jeeps without listing models. For 1980 and newer CJ7, CJ8 and Comanche models, the SP1402 with MetricLine connections is the listed part instead.

How can I tell if the power steering pump needs replacing?

Whining or groaning when turning, hard steering at low speed, dark or foamy fluid, and leaks around the pump all point to wear or failure. Check the fluid level first, since low fluid can cause similar symptoms.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop PSC Steering Power Steering Pump on Amazon