Overview
The Borgeson Steering 800328 is a power steering pump that comes with a new pump drive. Its reservoir is listed with two returns.
Confirm fit for your vehicle’s year, make, model and engine before ordering.
Pump replacement basics
A power steering pump supplies pressure to the steering gear through the hoses, and it is driven by the engine belt. When a pump begins to fail it often makes a whine, shows foaming or dark fluid, or makes the steering stiff at low speed. Replacing the pump is a larger job than most hose or fluid repairs, so the diagnosis should be confirmed first.
Because the pump is belt driven, check the pulley, belt and tensioner at the same time. A misaligned pulley or worn belt will shorten the life of a new pump. Reservoir fittings and the hose ends should be inspected for cracks, since a pump with new internals can still leak at an old connection.
Before installation, compare the drive and mounting configuration with the old pump, and plan to flush the system if the fluid was dirty. Topping off with fresh fluid and bleeding air after the first start helps protect the new pump during its first hours of use.
Specifications
| Brand | Borgeson Steering |
|---|---|
| Part number | 800328 |
| UPC | 843975016665 |
| Included | New pump drive |
| Reservoir | Two returns |
Vehicle fitment
Check the year, make, model and engine against the pump before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A new pump drive is included with the pump.









