Overview
The Prothane 19-607 is a red rear pivot bushing with a 2 1/2 inch tube length, 1 1/2 inch outside diameter and 2 1/2 inch sleeve length. It is a universal fit bushing, not tied to a specific vehicle.
It has a 1/2 inch bolt size and suggests tubing of 1 3/4 inch x 1/8 inch, 1 7/8 inch x 3/16 inch or 2 inch x 1/4 inch. Measure your pivot before installing.
Key features
- Red finish
- 2 1/2 inch tube length
- 1/2 inch bolt size
- 2 1/2 inch sleeve length
- Suggested tubing sizes listed
- Universal fit
Pivot bushing wear and replacement
A rear pivot bushing sits where a control arm or link swings on its mount, so it carries the movement of the axle as the suspension travels. When the rubber wears, the joint can feel loose, clunk over bumps, or wander under braking. Polyurethane bushings are firmer than rubber, which makes the ride feel more direct but also carries more noise and vibration into the cabin.
When choosing sizing, the sleeve and tube need to match the pivot bore. Check the fit before pressing the bushing in. Pivot bushings are often replaced in pairs, since both sides wear at similar rates. Replace the sleeve and bolts at the same time, and clean the bore of rust before installing the new part.
Lubricate the sleeve only if the design calls for it. Check the joint at each oil change for play, cracks, or squeaks. Re-tighten the bolt after the first few drives so the bushing seats evenly.
- Inspect the sleeve and bolt together
- Clean rust from the bore before pressing in
- Replace pivot bushings in pairs when one side is worn
Specifications
| Brand | Prothane |
|---|---|
| Part number | 19-607 |
| UPC | 636169172205 |
| Position | Rear |
| Color | Red |
| Tube length | 2 1/2 in. |
| Bushing outside diameter | 1 1/2 in. |
| Sleeve length | 2 1/2 in. |
| Bolt size | 1/2 in. |
| Suggested tubing | 1 3/4 in. x 1/8 in.; 1 7/8 in. x 3/16 in.; 2 in. x 1/4 in. |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is listed with no year, make, model or chassis named. The bushing is not vehicle-specific, so compare its tube length with the pivot dimensions of your vehicle before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation for sleeves, tubing and hardware before starting.









