Overview
The Prothane 19-606 is a red rear pivot bushing with a 2 inch tube length, 1 1/2 inch outside diameter and 2 1/2 inch sleeve length. It is a universal fit part, so it is not built for a single vehicle.
It uses a 9/16 inch bolt size and suggests tubing of 1 3/4 inch x 1/8 inch, 1 7/8 inch x 3/16 inch or 2 inch x 1/4 inch. Confirm those dimensions against your pivot before installing.
Key features
- Red finish
- Rear position
- 9/16 inch bolt size
- 2 1/2 inch sleeve length
- Suggested tubing sizes listed
- Universal fit
Choosing a pivot bushing size
A pivot bushing is sized by its outside diameter, tube length and sleeve length, and each must match the mount it fills. Compare the bushing against the old part before installing, since a small mismatch can cause binding or early wear. The bolt size and the tubing wall thickness both affect how the bushing is held in place.
Fit is only one part of the choice. The material affects how the joint feels on the road, so decide whether you want a firmer or more flexible joint. Replace pivot bushings in pairs where possible, keep the old bushing for reference during installation, and inspect the surrounding axle mounts for cracks before fitting a new set.
- Outside diameter
- Tube and sleeve length
- Bolt size and tubing wall
Specifications
| Brand | Prothane |
|---|---|
| Part number | 19-606 |
| UPC | 636169172182 |
| Position | Rear |
| Color | Red |
| Tube length | 2 in. |
| Bushing outside diameter | 1 1/2 in. |
| Sleeve length | 2 1/2 in. |
| Bolt size | 9/16 in. |
| Suggested tubing | 1 3/4 in. x 1/8 in.; 1 7/8 in. x 3/16 in.; 2 in. x 1/4 in. |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit bushing, so it is not vehicle-specific. Measure the pivot it will replace before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The bushing and its dimensions are the items covered here. Check the package contents against your installation before starting.









