Overview
The Prothane pivot bushings, part number D/I19-601, are pivot bushings for an axle or suspension link. They are also identified as 19-601.
No vehicle is named and no bushing size is given, so measure the bushings you are replacing and compare them with this part before ordering.
Pivot bushing wear and replacement
Pivot bushings take repeated movement at the link ends, so they wear through the rubber or polyurethane over time. Worn bushings often show up as clunking over bumps, sloppy steering feel or uneven tire wear. Because the bushing sits inside a metal sleeve, it needs to match the inside and outside dimensions of the link or axle bore.
Polyurethane bushings are firmer than rubber and transmit more road feel, which can mean more noise and a stiffer ride. When replacing pivot bushings, inspect the sleeves and link ends for cracks or bent metal, and replace them in pairs on the same axle so movement stays even. Lubricate where the design calls for it.
- Inspect for cracks, tears and splits
- Measure the bore before buying
- Replace bushings in matched pairs
- Check the sleeve for rust or bends
Specifications
| Brand | Prothane |
|---|---|
| Part number | D/I19-601 |
| Product type | Pivot bushings |
Vehicle fitment
Fitment is not confirmed for a specific vehicle, axle or bushing size. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
Compare the piece count with the old bushings before starting the installation.









