Overview
The Energy Suspension 4.3121G is a black polyurethane rear axle pivot bushing set for the listed Ford F-series trucks and 1991-1994 Ford Explorer. The set must be installed in the existing outer metal shell.
Polyurethane bushings allow the suspension to travel its full range without binding. Worn, soft rubber bushings are a major cause of a vehicle wandering on the road.
Key features
- Polyurethane construction in black
- Designed for the rear position of the listed vehicles
- Set of axle pivot bushings that reuses the existing outer metal shell
Shell condition and fit
The outer metal shell holds the polyurethane bushing in place and keeps it aligned as the axle moves. Because the set is installed inside that shell, the shell’s condition sets how well the new bushings perform. A shell that is cracked, bent or heavily corroded can let the bushing shift, so it should be examined closely before any new parts go in.
Clean the shell and bore thoroughly before pressing in the new set. Light rust can be wire brushed, but deep pitting or distortion calls for replacing the shell rather than reusing it. Some squeaking can occur with polyurethane parts, especially when they are new, so check that the set is seated fully and the contact surfaces are clean.
- Inspect the outer shell for cracks and bends
- Clean the bore before pressing in the set
- Replace a shell with deep pitting or distortion
- Confirm the set is fully seated after installation
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 4.3121G |
| UPC | 703639332664 |
| Material | Polyurethane |
| Color | Black |
| Position | Rear |
| Type | Axle pivot bushing set |
Vehicle fitment
The manufacturer fitment list covers 1980-1983 and 1983-1986 Ford F-100 and F-150, 1980-1986 and 1990-1996 Ford F-250 and F-350, and 1991-1994 Ford Explorer and Explorer Sport. It also lists 1992-1994 Mazda Navajo.
Vehicles outside these years and models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This set must reuse the existing outer metal shell, so the old outer shell must be in good condition before installation.
What’s included
It is sold as an axle pivot bushing set.









