Overview
The K&N AirCharger 63-2597 is a cold air intake system for the 2017–2018 Ford F-250 Super Duty and 2017–2018 Ford F-350 Super Duty. It replaces the factory air filter and air intake housing with a K&N high-flow filter, a heat shield and a custom molded intake tube that carries air to the engine’s throttle body.
The intake is designed to smooth and straighten airflow and reduce restriction, so the engine can draw in more air than the factory assembly allows. The added airflow produces more usable power and acceleration across the RPM range, and the design carries a guaranteed power gain. The filter can be used for up to 100,000 miles before service, depending on driving conditions.
Key features
- Replaces the complete factory air intake system, including the filter and air box
- Heat shield installs into the previous air box space to draw cooler, denser air
- Free-flowing high density polyethylene intake tube
- Oversized K&N high-flow air filter made of cotton
- Filter service interval of up to 100,000 miles, depending on driving conditions
- Partial enclosure filter housing with a cold air intake type
- Covered by the K&N Million Mile Limited Warranty
Air filter care and inspection
A cold air intake changes the path air takes to the engine, so the filter, tube and clamps all affect how cleanly air reaches the throttle body. A cotton oiled filter needs periodic cleaning and re-oiling to keep airflow and filtration consistent. Check the filter at each oil change and look for dirt buildup, damp spots or oil that has soaked through the media.
Off-road use raises the stakes. Mud, water and fine dust can reach the filter if the housing seals are compromised, so inspect the seals and tube connections after trail runs. A loose clamp or cracked tube section can let unfiltered air reach the engine and should be repaired before the next drive.
- Retighten tube clamps after the first few drives
- Check the heat shield for cracks or loose fasteners
- Inspect the filter seal each time it is removed
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 63-2597 |
| UPC | 24844366498 |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Cotton |
| Inlet tube | Included |
| Fitment type | Direct fit |
| Filter service life | Up to 100,000 miles, depending on driving conditions |
Vehicle fitment
It fits the 2017–2018 Ford F-250 Super Duty and 2017–2018 Ford F-350 Super Duty in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
Earlier Super Duty model years and other Ford truck models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is relatively easy with commonly available tools and usually takes 90 minutes or less. Work with the engine cold and the battery disconnected before removing the old air box.
What’s included
The kit includes a K&N high-flow cotton air filter, a heat shield that fits the previous air box space and a custom molded intake tube.
The intake cannot be sold in California and is not legal for use on public roads where California emission standards apply.









