Overview
The K&N 57-2556 is a 57 Series performance air intake kit, part number 57-2556, for the 2004–2008 Ford F-150, the 2005 Ford Expedition and the 2006–2008 Lincoln Mark LT. It replaces the factory airflow assembly with a filter, an inlet tube and a partial enclosure housing, which gives the engine a cold air intake path.
The kit has an estimated gain of 15 HP. It uses a washable, reusable oil-type filter, and it carries the Million Mile Warranty. It suits owners of these trucks and SUVs who want an intake upgrade built around a reusable filter.
It is classified as a cold air intake, a category often searched when comparing intake upgrades for these vehicles. Matching part number 57-2556 against the vehicle groups below is the quickest way to confirm fit.
Key features
- Estimated gain of 15 HP
- Free-flowing high density polyethylene inlet tube
- Washable and reusable lifetime air filter
- Partial enclosure filter housing
- Cold air intake type with direct fit listed
- Made in the U.S.A.
Before you install on a truck
Trucks like the F-150 and Expedition carry a lot of hardware around the engine bay, so the new tube needs room to sit without rubbing. Check clearance to the hood, battery tray and steering components with the tube in place before tightening clamps. Small adjustments now prevent vibration noises later.
Heat is the other factor. Intakes that draw from low in the bay can warm up in stop-and-go traffic, which reduces the air benefit. Routing the inlet toward cooler air and keeping it away from the radiator fan shroud helps. Recheck the tube after the first few highway drives for any loosening.
- Confirm hood clearance with the tube seated
- Keep the inlet away from hot exhaust parts
- Retighten clamps after the first drives
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-2556 |
| UPC | 24844109507 |
| Series | 57 Series |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil |
| Inlet tube | Included, high density polyethylene |
| Fitment type | Direct fit |
| Estimated horsepower gain | 15 HP |
| Emissions status | 50 State Legal, CARB E.O. D-269-37 |
| Warranty | Million Mile Warranty |
| Country of manufacture | U.S.A. |
Vehicle fitment
The manufacturer fitment list covers three vehicle groups: the 2005 Ford Expedition in Eddie Bauer, Limited, XLS and XLT trims; the 2004–2008 Ford F-150 in FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, THE 60TH ANNIVERSARY EDITION, XL and XLT trims; and the 2006–2008 Lincoln Mark LT in Base trim.
Other Ford Expedition model years, F-150 years outside 2004–2008 and Lincoln Mark LT trims other than Base are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit replaces the factory airflow assembly, so check that each clamp and connection on the new tube is secure before the engine is started.
What’s included
The inlet tube is included, and the kit is built around a washable K&N filter. Check the packing contents against the installation steps when the kit arrives.









