Overview
The Fabtech FTS7343 is a front shock absorber for selected 2013–2015 Ram 2500 and Ram 3500 4WD trucks set up with a 5 inch lift. It is a direct-fit front shock from the Performance series twin tube line.
Front shocks do a large share of the damping on a lifted pickup, so this shock is matched to a 5 inch lift rather than a stock ride height. It is aimed at owners of Ram heavy-duty trucks who want a twin tube front shock for that lift.
Key features
- Performance series twin tube shock absorber design
- Front position, direct fit
- Sized for a 5 inch lift on 4WD Ram 2500 and 3500 trucks
- Fabtech part number FTS7343 with UPC 674866089426
Choosing a front shock for lift
A front shock does more than soften bumps on a lifted pickup. It controls wheel movement as the suspension compresses and rebounds, and the new ride height changes the angle the shock works at. Twin tube designs use an inner working tube and an outer reserve tube, which helps keep damping steady during repeated trail hits when the oil level stays consistent.
When replacing a front shock, think about the rest of the front end. Worn ball joints, bushings and bump stops change how a shock loads, and they are often replaced at the same time. Check the old unit for leaking oil, a damaged eye or a bent shaft before fitting the new one, and recheck fasteners after the first few drives.
- Look for oil seepage around the shaft
- Inspect bushings at both ends
- Check bump stop condition
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7343 |
| UPC | 674866089426 |
| Position | Front |
| Fit type | Direct fit |
| Lift height | 5 inch |
| Shock type | Performance series twin tube |
Vehicle fitment
It fits the 2014–2015 Ram 2500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, Tradesman) and the 2013–2014 Ram 3500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Lone Star, SLT, ST, Tradesman).
Ram 2500 model years after 2015 and Ram 3500 model years after 2014 are not in this list, and other Ram generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is sized for a 5 inch lift. If your truck runs a different lift height, the fitment stated here does not apply, so check with Fabtech before fitting.
What’s included
Check the package contents against your installation before starting, including any brackets or mounting hardware.









