Overview
The Pro Comp Traction Bar Mounting Kit, part number 71201B, is a bolt-on bracket kit for a traction bar. It is designed to fit 2011 to 2013 GM Silverado and Sierra 2500HD Crew Cab Long Bed 4WD trucks, and the kit is sold as a pair in black.
The kit is the mounting hardware that connects the traction bar to the truck. Traction bars of this type reduce axle wrap without restricting suspension articulation.
Key features
- Bolt-on application
- Includes bushings and sleeves
- Black finish
- Sold as a pair
Before you install
A traction bar limits axle wrap under acceleration and braking by holding the axle in position while the suspension still moves freely. The mounting kit is where that load enters the truck, so the brackets, bushings and sleeves have to be seated correctly before the bar is connected. Take time to check that each bracket sits square to the frame and that the bushings are not pinched.
Bushings in this type of mount wear over time, especially on trucks that see frequent off-road use or heavy towing. Look for cracking, flattening or play at the sleeves during periodic inspections, and replace worn bushings before they allow the bar to knock. Re-tighten the fasteners after the first few drives, since new rubber settles under load.
- Check bushings for cracks or flattening at each oil change
- Re-torque fasteners after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 71201B |
| UPC | 614901020588 |
| Application | Bolt-on |
| Included | Bushings and sleeves |
| Finish | Black |
| Quantity | Pair |
Vehicle fitment
It is designed for 2011 to 2013 Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD trucks in Crew Cab, long bed, 4WD configuration.
Other GM truck generations and bed lengths are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a bolt-on kit, so no drilling or welding is required. Install the included bushings and sleeves as supplied with the kit.








