Overview
The Pro Comp 91-5093B is a rigid frame-side track bar bracket for the 2005-2007 Ford F-250 Super Duty and F-350 Super Duty. It lowers the front track bar mounting point at the frame, which keeps the track bar close to its factory operating angle. The bracket is made of 3/16 inch thick steel, MIG welded, with grade 8 installation hardware. The part number is EXP91-5093B.
Used with the Pro Comp adjustable front track bar and drop pitman arm, the bracket is designed for steering geometry with increased front suspension travel and no bump steer. It fits the 2005-2007 Ford F-250 and F-350 Super Duty in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Key features
- Rigid frame-side design
- 3/16 inch thick steel
- MIG welded construction
- Grade 8 installation hardware included
- Lowers the track bar mounting point
- Recommended with the Pro Comp adjustable front track bar and drop pitman arm
Setting up a lowered track bar
A lowered track bar mount changes the angle at which the bar works, and the bar length and steering linkage have to match that change. A bar that is too long or too short shifts the axle position and affects steering feel. Checking the geometry after the install is the step that confirms the setup is correct.
Steering components are often checked together when a bracket is added. A drop pitman arm and a matching track bar work as a system, so a change to one usually means the other should be inspected. Look at the tie rod ends, drag link and track bar ends for play before final setup.
Frame-mounted brackets see road debris and rock strikes, so inspect the welds and bolts after rough trail use. Retorque hardware after the first few drives, and check that the bracket clears the frame and steering components at full lock.
- Check welds for cracks after rough trails
- Retorque hardware after the first drives
- Confirm clearance at full lock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 91-5093B |
| Listed part code | EXP91-5093B |
| UPC | 614901120073 |
| Position | Front |
| Type | Frame side |
| Material | 3/16 inch thick steel |
| Hardware | Grade 8 installation hardware |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005-2007 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL and XLT) and the 2005-2007 Ford F-350 Super Duty in the same trim range.
The 2008 and later Super Duty trucks and the 1997-2002 models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket changes where the track bar attaches to the frame, so the track bar length and the drop pitman arm need to be set to match. Have the steering geometry checked after the install, and confirm the track bar clears the frame and the steering components at full lock.
What’s included
The frame-side track bar bracket and its grade 8 installation hardware are included. The track bar and drop pitman arm are not included.







