Overview
The Pro Comp Steering Stabilizer Cylinder, part number 223200, is a replacement ES2000 series steering shock for a single steering stabilizer setup. It is supplied as the cylinder only and bolts to the stock mounts.
The cylinder is designed for aggressive off-road driving and oversized tires. It is a front, single unit, and the brackets are not included.
Key features
- Replacement steering stabilizer cylinder
- For a single steering stabilizer setup
- Bolts to stock mounts
- ES2000 series
Single stabilizer setups
A single steering stabilizer uses one cylinder on one side of the front axle to control steering motion. It is a simpler layout than a dual setup, which means fewer parts to match, but the cylinder carries the full damping load on that side. Because of this, keeping the cylinder’s mounting points, pivot bushings and the tie rod in good condition matters more with a single unit.
When replacing a single cylinder, compare the old unit’s eye-to-eye length and stroke with the new one before removing anything. Tires that are larger than stock and steering that is worn at the drag link both put more load on a single stabilizer. Replacing worn bushings and checking the steering box mounts at the same time helps the new cylinder last.
- Compare the old cylinder’s length before removing it
- Check pivot bushings at both ends
- Inspect the drag link for play
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 223200 |
| UPC | 614901118131 |
| Position | Front |
| Type | Single |
| Series | ES2000 |
| Contents | Cylinder only |
| Brackets | Not included |
| Shock boot | Not included |
Vehicle fitment
This cylinder fits these trucks:
- 2000 to 2008 and 2010 Dodge Ram 2500 and Ram 3500
- 2011 to 2012 Ram 2500 and Ram 3500
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One steering stabilizer cylinder. Not included: brackets and the shock boot.
























