Overview
The Pro Comp Pro Runner Dual Steering Stabilizer Kit, part number 222583Z, is a complete dual steering stabilizer kit with a shock cylinder and a bracket. It fits the 2008 to 2010 Dodge Ram 2500 and the 2011 to 2012 Ram 2500.
The Pro Runner stabilizer is built to improve handling and reduce wheel vibration, and it helps reduce bump steer caused by oversized tires.
Key features
- Dual setup
- Complete kit with shock cylinder and bracket
- Pro Runner line
Before you buy
A dual steering stabilizer setup uses two cylinders to damp steering movement on both sides of the linkage. On a truck with heavier tires or a lifted suspension, the stabilizer works harder, and worn parts show up as wander, vibration or a loose feel at highway speed. Dual setups depend on the brackets, tie rod ends and drag link staying tight, so inspect those parts when the kit goes in.
Before ordering, measure the tire size you run and note whether the truck has been lifted, since both change the load on the stabilizer. If the steering box or idler arm is worn, replacing it at the same time keeps the new kit from being overloaded. After installation, recheck the bracket bolts and have the front end alignment verified.
- Confirm the tire size before choosing a kit
- Inspect tie rod ends and the drag link
- Check bracket bolts after the first trail runs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 222583Z |
| UPC | 614901036367 |
| Type | Dual |
| Contents | Shock cylinder and bracket |
| Completeness | Complete kit |
Vehicle fitment
This kit fits these Ram trucks:
- 2008 to 2010 Dodge Ram 2500
- 2011 to 2012 Ram 2500
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Shock cylinder and bracket, as a complete dual kit.









