Overview
The Pro Comp Suspension 222525 is a single steering stabilizer kit for the 1984–1985 Toyota 4Runner and 1984–1985 Toyota Pickup. It uses one ES2000 steering stabilizer shock, which mounts across the steering linkage to damp quick side-to-side movement at the front wheels. A steering stabilizer, also called a steering damper, is the part that keeps the front end from wandering or kicking back on rough ground.
The ES2000 is built to improve handling, cut down on wheel vibration and reduce bump steer, the tendency of the steering to move when the suspension travels over bumps. That matters most on trucks running oversized tires or on rough roads. It is a direct-fit design for the two Toyota models below.
Key features
- Single ES2000 steering stabilizer shock
- All necessary mounting brackets included
- Designed to reduce wheel vibration and bump steer from oversized tires or rough roads
- Direct-fit design for the listed 1984–1985 Toyota models
- Part of the ES2000 series
Steering damper basics
A steering damper resists fast movement at the steering linkage, which is what keeps a truck from darting or kicking back after it hits a rut. On older Toyota pickups and 4Runners, the front end is often the first part to show wear, so the damper is most useful once bushings and tie rod ends are tight. A damper cannot correct loose steering by itself.
Check the stabilizer and its mounts at regular intervals, especially after off-road use. Look for leaking fluid, bent brackets, and hardware that has loosened. If the steering wheel feels heavy on one side or the truck wanders at speed, inspect the linkage before assuming the damper has failed.
- Look for fluid leaks on the shock body
- Check bracket hardware after rough trails
- Inspect tie rod ends at each service
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 222525 |
| UPC | 614901031379 |
| Type | Single steering stabilizer |
| Series | ES2000 |
| Brackets | Included |
| Shock boot | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–1985 Toyota 4Runner (DLX and SR5) and the 1984–1985 Toyota Pickup (Base, DLX and SR5).
Other Toyota 4Runner and pickup model years, and later generations, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets are supplied with the kit, so the stabilizer shock can be mounted without fabricating a bracket. Tighten the brackets to the hardware specifications used on the steering linkage.
What’s included
One ES2000 steering stabilizer shock and all the brackets needed to mount it.
Not included: shock boot.







