Overview
The Pro Comp Suspension 220565 is a dual steering stabilizer kit. It includes two ES2000 stabilizer shocks along with the bracketry needed to mount them. The kit is built for a dual layout on the steering, which is the arrangement Pro Comp uses when a single stabilizer is not enough.
The kit bolts into the original-equipment lower shock mounts on the vehicle rather than supplying new ones. The ES2000 design is intended to improve handling, reduce wheel vibration and cut bump steer caused by oversized tires or rough roads.
Key features
- Two ES2000 stabilizer shocks in one kit
- Bracketry included
- Requires original-equipment lower shock mounts
- Dual configuration for the steering
Checking the steering before install
A dual stabilizer adds damping to both sides of the steering linkage, which can help control wheel movement on rough ground. Because the setup depends on the mounts already on the vehicle, the first job is to inspect those mounts for cracks, corrosion and looseness. Replace any worn original part before the bracketry is attached, since the new shocks will load the mount in service.
Plan for periodic checks of the bracketry, shock ends and mounting bolts. Dual setups can drift out of balance, so inspect both sides at the same time and look for uneven wear on tie rod ends. Keep the shocks clean and free of mud, and replace a shock that leaks, feels stiff in one direction or allows play at its pivots.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 220565 |
| UPC | 61490103113 |
| Type | Dual |
| Series | ES2000 |
| Stabilizer shocks | 2 |
| Brackets | Included |
| Mounting requirement | Original-equipment lower shock mounts |
| Shock boot | Not included |
Vehicle fitment
Compare the year, model and trim of your truck with this kit before ordering. Confirm the original-equipment lower shock mounts on your steering before choosing this dual kit.
Confirm the year, model and trim before ordering, since the kit depends on the original-equipment mounts being present.
Installation notes
Check that the original-equipment lower shock mounts are present and undamaged before the bracketry is attached. Both shocks need to be set to the same extension so the steering stays centered.
What’s included
Two ES2000 stabilizer shocks and the bracketry.
Not included: shock boot, and the original-equipment lower shock mounts, which must already be on the vehicle.







