Overview
The Pro Comp Suspension 222582 is a complete dual steering stabilizer kit with a shock cylinder and a bracket included. The dual layout places two stabilizer units on the steering.
The ES2000 design is meant to improve handling, cut wheel vibration and reduce bump steer caused by oversized tires or rough roads. The shock bolts to the stock mounts already on the vehicle, so fit depends on those mounts being in place and in good condition.
Key features
- Complete dual kit
- Shock cylinder and bracket included
- Bolts to stock mounts
- Direct-fit type listed
Dual layout considerations
A dual stabilizer setup spreads the damping load across two points on the steering, which keeps one side from doing all the work when the front wheels are knocked off line. Both units should be checked together, because a worn unit on one side changes how the other loads up. Matching wear on both sides helps the steering feel even.
Before fitting, inspect the stock mounts for cracks, rust and loose welds, and check the tie rod ends and ball joints for play. Mounts that have been bent or repaired may not hold the shock in line. Plan for new fasteners if the old ones are corroded or stretched.
- Look for play in tie rod ends before fitting
- Replace corroded or stretched mounting hardware
- Re-check the bolts after the first few trail runs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 222582 |
| UPC | 614901202625 |
| Type | Dual |
| Series | ES2000 |
| Brackets | Included |
| Mounting | Bolts to stock mounts |
| Shock boot | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Fit depends on the stock mounts on your truck being present and in good condition. Confirm your vehicle’s year, model and trim before ordering, and check the mounts against the shock before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A complete dual kit with shock cylinder and bracket.
Not included: shock boot.









