Overview
The Pro Comp Suspension 222286 is a dual steering stabilizer kit with two ES2000 stabilizer shocks. All the necessary brackets are included. It is designed for 0 to 8.5 inch lift kits, so lift height is the main application guide.
The ES2000 design is intended to improve handling, reduce wheel vibration and help with bump steer caused by oversized tires or rough roads. Two shocks share the steering load in a dual layout on a lifted truck.
Key features
- Two ES2000 stabilizer shocks
- All necessary brackets included
- Designed for 0 to 8.5 inch lift kits
- Dual configuration
Setting up a dual layout
A dual layout splits the steering damping between two shocks, which can help on a lifted truck where the steering linkage works through a larger angle. The shocks must be mounted so both move through similar arcs, otherwise one side will carry more load than the other.
Before final tightening, set both shocks to equal extension and confirm the steering centers at straight ahead. Check bracket clearance at full lock to avoid rubbing on the frame, tires or brake lines. Inspect the mounts and the shock ends at each service, and keep the hardware torqued to the specified value. Worn tie rod ends and loose steering joints should be replaced first, since they will reduce the benefit of a dual setup.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 222286 |
| UPC | 614901127270 |
| Type | Dual |
| Series | ES2000 |
| Lift kit range | 0 to 8.5 inch |
| Brackets | Included |
| Shock boot | Not included |
Vehicle fitment
Confirm your truck’s year, model and trim before ordering, then measure the lift. Make sure the lift height falls inside the 0 to 8.5 inch range before choosing this dual kit.
Confirm the year, model and trim before ordering, and check that the lift height falls inside the 0 to 8.5 inch range.
Installation notes
Set both shocks to equal extension so the steering stays centered, and check the bracket clearance at full lock once the lift is installed.
What’s included
Two ES2000 stabilizer shocks and all necessary brackets.
Not included: shock boot.








