Overview
The Pro Comp Suspension 220580 is a single steering stabilizer kit built around one ES2000 shock. All the necessary brackets are included, so the kit mounts without factory lower mounts.
The ES2000 design improves handling, reduces wheel vibration and helps with bump steer. It is intended for oversized tires and rough roads, which are the usual causes of bump steer.
Key features
- One ES2000 stabilizer shock
- All necessary brackets included
- Direct-fit type listed
- Single configuration in the ES2000 series
Bump steer and tire size
Bump steer occurs when the steering linkage moves the wheels as the suspension travels up and down. Larger tires and lifted suspensions can make it more noticeable because the linkage geometry changes. A stabilizer resists the sudden steering input, so the wheel is less likely to be pushed off line when it hits a bump.
Good results depend on the rest of the steering system. Replace worn tie rod ends, drag link joints and steering box play before fitting the stabilizer, because a damper cannot make up for loose joints. After installation, test the steering at low speed over a rough patch and recheck the fasteners after the first few drives. Note any change in steering feel and address it before it becomes a larger problem.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 220580 |
| UPC | 614901695366 |
| Type | Single |
| Series | ES2000 |
| Brackets | Included |
| Shock boot | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Check that the mounting points on your truck match the brackets before installing.
Pick the kit only after checking the year, model and trim of your truck.
What’s included
One ES2000 stabilizer shock and all the necessary brackets.
Not included: shock boot.








