Overview
The Pro Comp Suspension 220537 is a single steering stabilizer kit with one ES2000 stabilizer shock and all the necessary brackets. It is intended for factory high rider packages or for an off-set pitman arm with more than 1.25 inches of off-set.
The ES2000 design improves handling, reduces wheel vibration and addresses bump steer caused by oversized tires or rough roads.
Key features
- One ES2000 stabilizer shock
- All necessary brackets included
- Designed for factory high rider or off-set pitman arm setups
- Single configuration
Pitman arms and steering geometry
The pitman arm converts steering box rotation into side-to-side movement of the drag link. When the arm is offset, the drag link sits at a different angle, and that changes how the stabilizer loads when the wheels turn. Measuring the offset and comparing it against the lift on the truck helps confirm the stabilizer will sit correctly.
A higher ride height often moves the steering linkage and changes the pivot angles at both ends of the stabilizer. Check that the stabilizer clears the frame, the crossmember and the tie rod through full lock. Keep the steering components in good order so the stabilizer is not working against worn joints.
- Measure pitman arm off-set at the arm before ordering
- Inspect the drag link and tie rod ends at the same time
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 220537 |
| UPC | 614901037678 |
| Type | Single |
| Series | ES2000 |
| Pitman arm offset | More than 1.25 inches |
| Brackets | Included |
| Shock boot | Not included |
Vehicle fitment
It fits trucks with a factory high rider package or an off-set pitman arm of more than 1.25 inches. Measure the off-set on your steering before ordering.
Confirm the year, model and trim before ordering.
What’s included
One ES2000 stabilizer shock and all the necessary brackets.
Not included: shock boot.








