Overview
The Pro Comp Suspension 63015 is a billet aluminum reservoir mount that connects a 2 inch shock to a 1.5 inch hoop tube. It is machined from 6061 aluminum with a finned design that Pro Comp says helps dissipate heat from the remote reservoir.
Key features
- Billet aluminum construction
- Finned design
- Mounts a 2 inch shock to a 1.5 inch hoop tube
Mount sizing and hardware
Sizing matters more than anything else with a reservoir mount. A mount that bridges two diameters must sit squarely on both the shock and the hoop tube, and a small mismatch can leave it cocked or put uneven load on one bolt. Measure the reservoir, the shock and the hoop before ordering.
Billet aluminum handles repeated loading well when the fit is right, but it can gall against steel if the hardware is over-tightened. Use the supplied hardware, apply light lubricant where needed, and check the fasteners after the first few drives. Replace any mount with cracks around the bolt holes.
- Measure before ordering
- Check the mount sits square on the tube
- Look for cracks around bolt holes
- Retighten after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 63015 |
| UPC | 614901109993 |
| Material | 6061 billet aluminum |
| Shock size | 2 in |
| Hoop tube size | 1.5 in |
| Sold as | Pair |
Vehicle fitment
The mount is sized for a 2 inch shock and a 1.5 inch hoop tube. Measure both before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair of billet aluminum reservoir mounts.













