Overview
The Pro Comp Shock Boot in teal, part number 11114, covers a shock absorber’s piston rod to keep out dirt, dust, mud and other debris. It is a universal fit boot.
Pro Comp gives the color as teal, and the quantity is a single boot.
Key features
- Covers the chrome-hardened piston rod
- Teal color
- Single boot per listing
Choosing a shock boot
A shock boot is a thin protective cover that sits over the piston rod, the chrome section that slides in and out of the shock body with every compression and rebound. Each time the rod extends, it picks up grit, mud and moisture, and that debris can work its way past the shock seal and scratch the rod. A boot slows that process by keeping the exposed rod clean.
Because boots are sized to the shock rather than the vehicle, the most useful check is the fit between the boot and the shock body. Measure the body diameter and rod diameter, then compare them with the boot before installing. A boot that is too tight can restrict travel, while one that is too loose can slip out of position on the rod.
- Measure rod and body diameter before buying
- Replace a torn boot rather than patching it
- Wipe the rod clean before installing a new boot
- Check the boot after every off-road trip
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 11114 |
| UPC | 614901020359 |
| Color | Teal |
| Quantity | Single |
Vehicle fitment
Before ordering, match the boot to your vehicle’s year, model and trim. Measure the shock body and piston rod before installing it.
Installation notes
The boot must match the shock’s rod and body size. Check the size against the shock before installing it.

















