Overview
The Pro Comp 11129 is a yellow rubber shock boot. It fits over the chrome-hardened piston rod of a shock absorber and seals out dirt, dust, mud and other contaminants. Keeping the rod clean this way helps extend the working life of the shock.
The boot is sold as each and is universal fit, so it is not built for one vehicle model.
Care and inspection
A shock boot shields the chrome piston rod, the part of the shock that slides in and out with every bump. When grit gets past the boot, it wears the seal at the top of the shock body and can start leaks. Pulling the boot back by hand every few trail trips shows what has collected underneath.
Wipe the rod clean with a damp cloth before fitting a new boot, so dirt is not trapped beneath it. Look for cracks, splits and a loose fit around the rod, since a damaged boot lets mud reach the shaft. If the shock shows oil on its body or a pitted rod, the shock itself may need service, and a new boot alone will not fix that.
- Check the boot for cracks, tears and hardening
- Wipe the rod clean before refitting a boot
- Look for an oil film on the shock body as a sign of seal wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 11129 |
| UPC | 614901020533 |
| Color | Yellow |
| Material | Rubber |
| Sold as | Each |
Vehicle fitment
It is a universal fit boot, so no specific vehicle, year or model applies. Confirm that the boot suits the diameter of your shock’s piston rod before ordering.
What’s included
One yellow rubber shock boot, sold as each.












