Overview
The Pro Comp Shock Boot in lime green, part number 11115, is a rubber boot that covers a shock absorber’s chrome-hardened piston rod. The boot keeps dirt, dust and mud off the rod, which Pro Comp says extends the life of the shock.
Pro Comp gives the color as fluorescent green, and the boot is sold as a single.
Key features
- Rubber boot for the chrome-hardened piston rod
- Lime green, a fluorescent green shade
- Sold as a single boot
Care and boot inspection
A shock boot works as a simple shield, but it only protects the rod while it stays seated and undamaged. Mud and grit can work under a loose boot and speed up wear on the seal. Check the boot each time the wheels are off and after trail runs with heavy splash, looking for tears, flattening or a boot that has slid out of position.
Rubber boots can stiffen in cold weather and crack with age, especially after exposure to sun and road salt. If a boot is cracked, replace it before it allows debris onto the chrome rod. When the rod shows pitting, the shock seal is usually the next item to check, and a boot alone will not fix it.
- Inspect the boot for tears after trail runs
- Wipe the rod clean before refitting the boot
- Replace a stiff or cracked boot rather than repairing it
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 11115 |
| UPC | 614901020397 |
| Material | Rubber |
| Color | Lime green (fluorescent green) |
| Quantity | Single |
Vehicle fitment
It is a universal fit, so check the boot against your shock’s body and rod size before installing it. Confirm the shock sizes it covers before ordering.
Installation notes
Measure the inside diameter of the boot against your shock body before installing it.


















