Overview
The Pro Comp Shock Boot in Royal Blue (part number 11100) is a poly-vinyl boot that covers a shock absorber’s chrome-hardened piston rod to keep dirt, dust, mud and other contaminants off it. Keeping grit off the rod helps the shock’s seals last longer.
The piston rod is the exposed chrome shaft that slides in and out of the shock body with every compression and rebound, so it collects grit that can wear the seals. A boot shields that section of rod. The boot is universal fit, so it is not tied to a particular make or model. Check the boot against your shock’s piston rod before installing it.
Key features
- Royal Blue poly-vinyl construction
- Covers the chrome-hardened piston rod against dirt, dust, mud and other contaminants
- Helps extend the life of the shock by keeping contaminants off the rod
- Universal fit label from Pro Comp
Fitting the boot to a shock
A shock boot works only as well as its fit on the shock it protects. Before installing, look at the piston rod and the shock body. The rod should be clean and free of pitting, because a damaged rod can tear the boot and wear the shock seal. Slide the boot onto the rod and seat it so the open end sits flush against the shock body.
Once the boot is on, cycle the suspension through its full range by hand. A boot that rubs against the shock body or binds at either end of travel will wear through faster. Protecting the rod is most useful on trucks that see mud, sand or gravel roads, where grit is thrown onto the shock every mile.
Boots are often replaced along with the shock seals when a shock is rebuilt, since a worn boot lets contaminants reach the rod again. Inspect the boot regularly for cracks, splits and loose seating.
- Check rod condition before fitting
- Cycle the suspension after installation
- Replace a cracked boot promptly
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 11100 |
| UPC | 614901020311 |
| Color | Royal Blue |
| Material | Poly-vinyl |
| Quantity | Each |
| Fitment type | Universal fit (per Pro Comp) |
Vehicle fitment
Pro Comp labels this boot universal fit, so no vehicle is named. Its suitability depends on the shock it covers, so match the boot to your shock body and piston rod rather than to a vehicle.
Installation notes
Once the boot is on, check that it clears the shock body at full compression and at full extension, so that it does not rub or bind.
What’s included
One boot. The shock absorber the boot covers is not included.











