Overview
The Pro Comp Nitro 62689K is a 3.5-inch leveling lift kit with 3.5 inches of front lift and 3 inches of rear lift. The front uses coil spring spacers, and the rear uses lift blocks with U-bolts. It is for 4WD models with a maximum tire size of 35 inches.
Pro Comp designs its Nitro kits as an economical alternative to a complete suspension system. The factory steering geometry stays intact, and the track bar drop bracket is included.
Key features
- 3.5 inches of front lift
- 3 inches of rear lift
- Front coil spring spacers
- Rear lift blocks with U-bolts
- Track bar drop bracket included
- Maximum tire size of 35 inches
Drivetrain and alignment checks
Four-wheel-drive trucks have extra driveline parts, so a lift affects the transfer case, front axle and driveshafts. The angles change as the truck rises, and a 4WD-only kit should be paired with a drivetrain check after installation. Look for vibration, leaks at the axle seals and unusual noises during slow turns. The front axle breather and vent hoses should also be checked for routing that is now too tight.
Track bar setup matters for steering stability at highway speeds. The drop bracket changes the geometry, so the track bar bushings and ends should be inspected for play before the alignment. Wear on the front tires can point to alignment or suspension problems that should be fixed early. Keep notes on the torque of bolts and the alignment readings for future service.
- Inspect axle seals for leaks
- Check vent hoses for kinks or tight routing
- Look for uneven front tire wear
- Schedule an alignment after the track bar is set
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 62689K |
| UPC | 614901022926 |
| Type | Nitro leveling lift kit |
| Front lift height | 3.5 inches |
| Rear lift height | 3 inches |
| Front lift method | Coil spring spacers |
| Rear lift method | Lift blocks with U-bolts |
| Maximum tire size | 35 inches |
| Spacer material | Steel |
| Finish | Black |
| Drivetrain | 4WD models |
Vehicle fitment
The fitment covers 2011 to 2016 Ford F-250 and F-350 Super Duty trucks in King Ranch, Lariat, Platinum, XL and XLT trims.
The kit is for 4WD models only. The 2008 to 2010 Super Duty and the F-150 are not on this list. Confirm your vehicle’s year, model, drivetrain and trim before ordering.
Installation notes
The alignment should be checked after the lift is installed. Check the rear lift blocks and U-bolts after the first drive.









