Overview
The Pro Comp Jeep Crawler Rear Bumper with D-ring Mounts and Receiver, part number 66168, is a gloss black rear bumper made from 1/4 inch plate steel for the 1987–1995 Wrangler YJ, 1997–2006 Wrangler TJ and 2004–2006 Wrangler LJ.
The bumper is designed for high departure and approach angles, and Pro Comp says its 1/4 inch plate steel helps slide a Jeep over boulders, rocks and stumps. D-ring mounts are built in, though D-rings are not included. The 2 inch receiver is not rated for towing. Drilling is required on the 1997–2000 TJ Wrangler.
Key features
- 1/4 inch plate steel construction
- Designed for high departure and approach angles
- Gloss black powder coat finish
- D-ring mounts included, D-rings not included
- 2 inch receiver, not rated for towing
- Drilling required on the 1997–2000 TJ
D-rings and mounting setup
D-ring mounts give a secure point for recovery straps or shackles, but the rings themselves must be bought separately. Choose rings and shackles rated for recovery use and sized to the mount opening, so the connection does not bind or bend under load. Keep the mounts clean and free of rust to help the rings turn freely.
Check the mount welds and bolts before each trail trip, since they carry the load during a recovery. The bumper’s receiver is not rated for towing, so it should be kept separate from recovery lines and tow points. Plan the mounting so the rings sit clear of the bumper face when a strap is pulled at an angle.
- Use recovery-rated D-rings sized to the mount
- Inspect mount welds before each trail trip
- Keep recovery lines separate from the receiver
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 66168 |
| UPC | 614901661682 |
| Product type | Rear bumper with D-ring mounts and receiver |
| Position | Rear |
| Material | Plate steel, 1/4 inch |
| Finish | Gloss black powder coat |
| Receiver | 2 inch, not rated for towing |
| D-ring mounts | Included |
| D-rings | Not included |
| Tire carrier | No |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler LJ, the 1997–2006 Jeep Wrangler TJ and the 1987–1995 Jeep Wrangler YJ.
This bumper does not suit JK or JL Wranglers. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required on the 1997–2000 TJ Wrangler. Do not use the 2 inch receiver for towing, as it is not rated for it.
What’s included
- Rear bumper with 2 inch receiver
- D-ring mounts
Not included: D-rings and a tire carrier.









