Overview
The Skyjacker 7009 is a single steering stabilizer from the Hydro 7000 HD OEM range, part number 7009 and UPC 803696109763, with urethane bushings and double-eyelet ends. It replaces a worn or leaking stabilizer and fits Jeep Cherokee XJ, Grand Cherokee ZJ, Comanche, Wagoneer SJ and several Wrangler generations.
The 7009 helps with vehicle control, tire wear and front-end shimmy.
Key features
- Urethane bushings included
- Double-eyelet ends
- Red shock boot
- Single-cylinder design in the Hydro Series
Signs the stabilizer is wearing
A steering stabilizer works against side-to-side movement at the front axle, so it carries the most load when the wheels hit bumps or when the tires are out of balance. Over time the cylinder can lose its damping, and the front end may begin to wander or shimmy at highway speeds. Check the cylinder body for oil seepage and inspect the boot for tears that let grit in.
Bushing wear shows up as clunking over washboard roads or a loose feel when turning the wheel. Grab each eye and try to move it by hand with the vehicle off the ground. Movement there points to worn bushings or loose hardware, which should be fixed before judging the stabilizer on its own. Replacing a stabilizer is also a good time to inspect the tie rod ends and drag link, since they carry the same loads.
- Oil on the cylinder body or past the seals
- Torn or missing shock boot
- Clunking over bumps or rough pavement
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 7009 |
| UPC | 803696109763 |
| Series | Hydro Series |
| Type | Stabilizer only |
| Configuration | Single |
| Boot | Red shock boot |
| Bushings | Urethane |
| Eye style | Double eyelet |
| Brackets | Not included |
Vehicle fitment
It fits the 1984 to 2000 Jeep Cherokee XJ, 1986 to 1992 Comanche, 1993 to 1998 Grand Cherokee ZJ, 1984 to 1990 Wagoneer SJ, 2007 to 2016 Wrangler JK, 2004 to 2006 Wrangler LJ Unlimited, 1997 to 2006 Wrangler TJ and 1987 to 1995 Wrangler YJ.
Later JK years, all JL models and Grand Cherokee WJ models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 7009 uses double-eyelet ends and urethane bushings, so check that the eyes match your existing mounting points before installing.
What’s included
One replacement stabilizer with urethane bushings, double-eyelet ends and a red shock boot.
Not included: brackets.
















