Overview
The Skyjacker Hydro 7000 single steering stabilizer kit, part number 7119, is a single Hydro Series steering stabilizer supplied as the stabilizer only, with a red shock boot.
Steering stabilizers restrain bump steering and front-end vibration. This kit is a single stabilizer from the Hydro Series. Brackets are not included, so gather the mounting parts you need before starting.
Key features
- Steering stabilizer, single kit
- Hydro Series
- Engineered to restrain bump steering and front-end vibration
- Stabilizer only; brackets are not included
- Red shock boot included
- Direct fit listing
Steering stabilizer care
A steering stabilizer dampens quick movements at the steering linkage, which helps keep the front wheels steady when a tire hits a bump or when the vehicle travels over rough ground. Because it works on every turn of the wheel, it takes a lot of load over its life, and its seals and bushings gradually wear.
Worn stabilizers show up as wandering, a wobble that builds at certain speeds, or a shimmy after a hard bump. Inspect the body, boot and mounting points for leaks, cracks and loose hardware. Replace the stabilizer when play or leakage appears, rather than waiting for a failure on the trail.
When a stabilizer is replaced, check the tie rod ends, drag link and other steering parts at the same time, since they affect the same geometry. A new stabilizer on worn parts will not restore the steering feel you expect.
- Inspect boots for tears
- Check mounting hardware for looseness
- Recheck the alignment after replacing parts
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 7119 |
| UPC | 803696110998 |
| Product type | Steering stabilizer kit |
| Series | Hydro Series (Hydro 7000) |
| Quantity | Single |
| Type | Stabilizer only |
| Brackets | Not included |
| Shock boot | Red shock boot included |
| Fitment type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check the vehicle application and the brackets you will need.
Do not assume the stabilizer suits a vehicle that has not been confirmed by the manufacturer. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Steering components are safety-critical, so professional installation is recommended. Use the correct torque values for your vehicle when tightening fasteners.
- Have the alignment checked after installation.
- Check the steering for binding through full lock to lock travel before driving.
- Re-check fasteners after the first miles of driving.
- Make sure the brackets and mounting points you use suit the vehicle and the stabilizer.
What’s included
- One Hydro Series steering stabilizer
- Red shock boot
Not included: Brackets are not included, so have the mounting hardware ready before installation.









