Overview
The Skyjacker JA750 is a 4 inch drop pitman arm for the 2004–2005 Jeep Wrangler (LJ), the 1997–2005 Wrangler (TJ) and the 1987–1995 Wrangler (YJ) with power steering.
The arm is made for power steering on vehicles with a 4 inch suspension lift. A lift changes steering angles, and this arm helps protect stock components, restore turning radius, eliminate bump steer and prevent frame damage.
Skyjacker also says its forged steering products are made in the USA and individually X-rayed and magnafluxed for guaranteed quality. The arm is a direct fit in the front position.
The list spans three Wrangler generations. The YJ is named for 1987–1995, the TJ for 1997–2005 in Rubicon, SE, Sahara, Sport and X trims, and the Unlimited LJ for 2004–2005. A Wrangler owner running a 4 inch lift and a power steering box is the target user.
Key features
- 4 inch amount of drop
- Front position
- For power steering
- Direct fit
- It is made for vehicles with a 4 inch suspension system lift.
- Forged and made in the USA, as Skyjacker states
- It is individually X-rayed and magnafluxed for quality.
Power steering and lift height
Power steering boxes load the pitman arm differently from manual ones, so the arm needs to match the steering system that is installed. When a lift raises the front, the arm angle changes and the steering can feel vague or tight in the center. A drop arm helps correct the geometry, but the rest of the linkage still determines how the steering feels on the trail.
Wrangler owners often pair a pitman arm with a new track bar, drag link or steering stabilizer when the suspension changes. Old joints with play can make a new arm feel loose, so replacing worn parts at the same time keeps the steering tight. Tire size also matters, because bigger tires add weight and turning force at the steering box.
- Inspect the steering box for leaks
- Check the track bar and tie rod ends for wear
- Confirm the drag link clears the axle
- Recheck steering wheel center after installation
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JA750 |
| UPC | 803696144344 |
| Product type | Drop pitman arm |
| Amount of drop | 4 inches |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Power steering |
| Lift guidance | Required with a 4 inch suspension system lift |
| Origin | Made in USA. |
Vehicle fitment
It fits three Wrangler generations, with the trims below.
- 2004–2005 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon)
- 1997–2005 Jeep Wrangler (TJ) (Rubicon, SE, Sahara, Sport, X)
- 1987–1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport)
Confirm fit for your vehicle’s year, model and trim before ordering, since the TJ and LJ entries end in 2005.
Installation notes
Follow the supplied steps and have a qualified technician check the steering after installation.
What’s included
One forged pitman arm. Compare the contents with your installation before starting.









