Overview
The Pro Comp 3-inch front leaf spring for the right side, part number 31222R, is a multi-leaf spring with diamond cut leaves. It is rated for a 3-inch lift and is sold as each, with polyurethane bushings included.
The diamond cut multi-leaf design and urethane bushings add clearance and improve ride quality. The spring is a single unit for the front right corner of the vehicle.
Key features
- Diamond cut multi-leaf construction
- Polyurethane bushings included
- 3-inch lift rating
- Front right position
- Single spring per each
Replacing springs in pairs
A leaf spring holds up one corner of the vehicle and works with the axle, shackles and bushings to control the ride. When one side is replaced, the other side may sit at a different height, and the two springs will not share load evenly. That mismatch can pull the vehicle to one side and wear tires unevenly.
Before fitting a new spring, check the shackles, hangers and U-bolts for wear and cracks. Replace worn bushings and clean the spring pad area so the new leaves seat properly. Tighten the fasteners after the first drive, since leaf spring hardware can loosen as the spring settles.
- Replace front springs as a matched pair
- Inspect shackles and hangers for wear
- Clean the spring seat before installing
- Re-torque U-bolts after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 31222R |
| UPC | 614901140255 |
| Position | Front right |
| Lift height range | 3 inches |
| Spring type | Multi-leaf, diamond cut |
| Spring quantity | Single spring |
| Bushings | Polyurethane, included |
| Sold as | Each |
| Fitment | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and front axle before installing the spring.
Because the spring is sold each, a front set needs a left side spring as well. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front right leaf spring with polyurethane bushings.
Not included: The left front leaf spring.









