Overview
The Pro Comp 4 Inch Front Leaf Spring for the right side, part number 31212R, is a right-front leaf spring for the 1980–1985 Toyota Pickup and the 1984–1985 Toyota 4Runner.
The spring is a single diamond-cut multi-leaf unit with polyurethane bushings. Its lift height range is 4 inches, and the diamond-cut multi-leaf design is built for a comfortable ride.
Key features
- Right side front position
- Single spring
- Polyurethane bushings included
- 4 inch lift height range
Wear signs on front springs
Front leaf springs fatigue slowly, so the change in the truck is often gradual. A sagging corner, a front end that sits lower on one side, or a steering wheel that is off center can all point to a weakened spring. Look closely at the leaf ends and the center bolt for cracks or shifting.
Bushings in the spring eyes wear as well. Soft or split bushings allow clunks over bumps and can make the front end feel loose. Replacing the spring and bushings at the same time is common when the old parts have worn together.
- Inspect leaves for cracks, especially near the center bolt
- Check the spring eyes and bushings for play
- Look for uneven tire wear across the front axle
- Compare ride height between the two front corners
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 31212R |
| UPC | 614901140217 |
| Position | Front right |
| Spring quantity | Single spring |
| Bushings | Polyurethane, included |
| Lift height range | 4 inches |
| Design | Diamond-cut multi-leaf |
| Quantity | 1 (each) |
Vehicle fitment
It fits the 1980–1985 Toyota Pickup and the 1984–1985 Toyota 4Runner.
Other Toyota years and models, including later 4Runner generations, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a single right-side spring, so the left side needs its own part.
What’s included
One right-side front leaf spring with polyurethane bushings.









