Overview
It is a single rear leaf spring for the 2014–2015 Toyota Tundra, including SR, SR5, Limited, Platinum, 1794 Edition and TRD Pro trims. It provides a 1.5 inch lift.
The spring is a diamond-cut multi-leaf design with urethane bushings, which adds clearance and a better ride. Check the 2.5 in. bushing size against your hardware before fitting.
Key features
- Rear-mounted single leaf spring
- Diamond-cut multi-leaf construction
- Urethane bushings
- Direct fit for the 2014–2015 Tundra
Lift, load and rear axle care
Rear leaf springs carry the bed load and help control axle movement over bumps. A spring change also alters how the rear sits under load, so a truck that carries heavy cargo may ride differently afterward. Consider how the truck will be used before choosing a lift height, since a higher rear changes braking and handling slightly.
Use fresh shackle and hanger hardware where practical, and make sure the spring seats correctly in its mounts. Check the rear driveline angle after installation. Over time, look for sagging leaves, cracked eyes, worn bushings and any noise from the axle. Re-tighten fasteners at regular intervals as part of routine maintenance.
- Check the driveline angle after installation
- Inspect bushings for cracks or compression
- Re-torque U-bolts after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 31223 |
| UPC | 614901147230 |
| Position | Rear |
| Lift height | 1.5 inch (per product title) |
| Spring quantity | Single spring |
| Bushings | Urethane, 2.5 in. |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2014–2015 Toyota Tundra in the 1794 Edition, Limited, Platinum, SR, SR5 and TRD Pro trims.
The 2016 and later Tundra, and earlier generations, are not part of this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the bushing size and the mounting hardware on your truck against the spring before installing it.
What’s included
One rear leaf spring with urethane bushings.








