Overview
The Pro Comp Suspension 13511 is a 4 inch rear leaf spring. It is a single spring, sold each, with polyurethane bushings included. The spring measures 56 in. long.
Diamond-cut multi-leaf springs with urethane bushings add clearance and improve ride quality. Check the leaf pack length and the axle on your truck against this spring before choosing it.
Key features
- 4 inch lift rear leaf spring
- Diamond-cut multi-leaf construction
- Polyurethane bushings included
- Listed with a 56 in. rear spring length
Care and driveline checks
Leaf springs carry load through stacked steel leaves, and the bushings at each eye control how the spring moves at the frame and hanger. Over time the leaves can sag or take a set, and the bushings can wear, which changes ride height and axle location. A periodic check of the eyes, the U-bolts, and the shackle can catch these problems before they cause noise or handling changes.
When a rear spring is replaced, the axle position changes relative to the driveline, so the pinion angle should be measured after installation and the U-bolts retightened after the first few drives. Replacing the shackles and bushings at the same time keeps the new spring working as designed and avoids mismatched wear.
- Check spring eyes and bushings for cracks or play
- Retighten U-bolts after the first drives
- Measure pinion angle after installation
- Inspect shock mounts for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13511 |
| UPC | 614901135114 |
| Position | Rear |
| Lift height | 4 inch |
| Spring length | 56 in. |
| Spring quantity | Single spring |
| Bushings | Polyurethane, included |
Vehicle fitment
The rear application depends on the leaf pack length and the axle, so confirm both on your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 4 inch rear spring changes the pinion angle, so check the driveline angle after installation.
What’s included
One rear leaf spring with polyurethane bushings.









