Overview
The Pro Comp Suspension 51422 is a 4 inch rear leaf spring for either the driver or passenger side. It is sold individually and includes polyurethane bushings. The diamond-cut multi-leaf design is intended to add clearance and improve ride quality.
The spring is sold one side at a time, so a rear pair needs two springs matched to the same 4 inch lift.
Key features
- 4 inch rear lift
- Driver or passenger side
- Diamond-cut multi-leaf construction
- Polyurethane bushings included
Matching a rear pair
Rear springs are sold per side, so matching matters more than the part number alone. Two springs with different arch, eye spacing or free height will pull the axle out of line and can leave the truck sitting uneven. Measure both old springs before ordering if the truck has already been modified.
Installation is a bolt-in job for most trucks, but the axle must be supported and the U-bolts or shackles torqued once the truck is back on the ground. Re-check the bolts after the first few drives, since new bushings settle. A driveline check should follow, because pinion angle changes with spring height.
- Measure ride height on both sides after the swap
- Check the shock mounts for clearance
- Torque U-bolts once the truck is on the ground
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51422 |
| UPC | 614901140446 |
| Position | Rear, driver or passenger side |
| Lift height | 4 inch |
| Spring quantity | Single spring |
| Bushings | Polyurethane, included |
| Fitment type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and rear axle before ordering, since a rear spring must match the axle it replaces.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear spring changes affect the pinion angle, so check the driveline after the spring is installed on either side.
What’s included
One rear leaf spring with polyurethane bushings.









