Select your vehicle
-13%

Pro Comp 4 Inch Rear Lift Block – 95-400SDB

Pro Comp Suspension

Shop Pro Comp Suspension Blocks on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 4 in rear lift block, part number 95-400SDB
  • Sold in pairs
  • For the rear only

Description

Overview

The 95-407SD is a 4 inch rear lift block sold in pairs.

Key features

  • 4 inch rear lift
  • Sold in pairs
  • Rear use only

Keeping the rear end square

A rear block changes the position of the axle under the springs, which can shift the axle slightly off center if the blocks or U-bolts are not matched. Measure the distance from the axle to a fixed point on each side after installation. Matching measurements help keep the rear tires tracking straight and the brakes wearing evenly.

Riser blocks should be treated as a rear-only part, and their hardware should be inspected at regular intervals. Look for hardware that has loosened, blocks that have worked out of place and any cracks around the mounting faces. Replacing the U-bolts at the same time as the blocks keeps the clamping even on both sides.

  • Measure axle position on both sides
  • Check tire wear for tracking issues
  • Inspect hardware after the first drives
  • Replace U-bolts with the blocks when worn

Specifications

Brand Pro Comp Suspension
Part number 95-400SDB
UPC 614901126969
Lift height 4 in
Position Rear
Sold as Pair

Vehicle fitment

Check your spring and axle setup before ordering, since fit depends on the vehicle.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Riser blocks should never be placed on the front of any vehicle. Check the driveshaft angle once the rear is raised.

What’s included

A pair of rear lift blocks.

SKU: EXP95-400SDB Category:

Specification

Shipping weight 22.00 lbs
Package dimensions 15.00 × 5.00 × 3.00 in
brands

Questions & Answers

Can the Pro Comp 95-400SDB go on the front?

No. Pro Comp says riser blocks should never be used on the front of any vehicle. The 95-400SDB is a rear block sold in pairs, so keep it on the rear leaf spring pack only.

How much lift does the Pro Comp 95-400SDB give?

4 inches at the rear. The block is a rear lift block sold in pairs, with part number 95-400SDB and UPC 614901126969.

Is the Pro Comp 95-400SDB sold as a pair?

Yes. The block is sold in pairs, so each rear spring gets one. Check your spring and axle setup and the driveshaft angle after the rear is raised.

Do riser blocks need different U-bolts?

Often yes. Adding height moves the axle away from the spring pack, so existing U-bolts may not reach. Measure the U-bolt legs and confirm the length before installation.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Pro Comp Suspension Blocks on Amazon