Overview
The Pro Comp Nitro 62668K is a leveling lift kit with 2.5 inches of front lift and 2 inches of rear lift. The front uses coil spring spacers, and the rear uses lift blocks with U-bolts. The kit is for 4WD models with a maximum tire size of 37 inches.
It is an economical alternative to a complete suspension system, and it leaves the factory steering geometry intact, which helps preserve ride quality and handling. The kit suits front-mounted accessories such as snow plows, heavy-duty bumpers and winches. It includes a track bar drop bracket, hardware and instructions.
Key features
- 2.5 inches of front lift
- 2 inches of rear lift
- Front coil spring spacers
- Rear lift blocks with U-bolts
- Track bar drop bracket included
- Maximum tire size of 37 inches
Rear lift and driveline
Lift blocks with U-bolts raise the rear axle, which changes the angles of the driveshaft and pinion. Small changes are normal, but a steep angle can cause vibration at highway speed. Inspect the U-bolts and the driveshaft for wear after the first drive, and tighten the hardware as the instructions direct.
Front-mounted accessories such as winches and plows add weight to the nose, and that load works with the front springs rather than the rear. Choose a setup that matches the truck’s use and check tire clearance with the accessory fitted. Heavy accessories often call for a recheck of front height and alignment.
- Check U-bolt tightness after the first drive
- Look for driveline vibration at speed
- Recheck alignment after adding a winch or plow
- Confirm rear axle clearance at full droop
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 62668K |
| UPC | 614901022322 |
| Type | Nitro leveling lift kit |
| Front lift height | 2.5 inches |
| Rear lift height | 2 inches |
| Front lift method | Coil spring spacers |
| Rear lift method | Lift blocks with U-bolts |
| Maximum tire size | 37 inches |
| Spacer material | Steel |
| Finish | Black |
| Drivetrain | 4WD models |
Vehicle fitment
It fits 4WD models. Confirm your vehicle’s year, model and trim before ordering, and confirm the truck is 4WD.
Check Pro Comp’s application list for your vehicle’s year, model and trim before ordering, and confirm the truck is 4WD.
Installation notes
An alignment is needed once the lift is complete. Because the rear is lifted with lift blocks and U-bolts, check the driveline angles after the first drive.








